linux 时间同步的2种方法

张映 发表于 2012-10-23

分类目录: 服务器相关

标签:, , ,

由于硬件的原因,机器或多或少的根标准时间对不上,一个月的误差几秒到几分钟不等。对于服务器来说时间不准,会有很多麻烦。例如,支付的时候,无法下单,游戏无法登录等。自己用的PC就无所谓了,手动改一下就行了。

一,用ntpdate从时间服务器更新时间

如果你的linux系统根本没有ntpdate这个命令

yum install ntp

安装完了之后,你不要做什么配置,也不需要,直接测试一下

[root@localhost ~]# ntpdate time.nist.gov
22 Oct 21:11:43 ntpdate[5014]: adjust time server 207.200.81.113 offset -0.018788 sec

如果出去上面的内容说明,同步成功了。然后在crontab里面加上以下内容。

*/10 * * * * ntpdate time.nist.gov   #域名或IP

每隔十分钟同步一次。推荐几个时间服务器。

time.nist.gov
time.nuri.net
0.asia.pool.ntp.org
1.asia.pool.ntp.org
2.asia.pool.ntp.org
3.asia.pool.ntp.org

二,用ntp搭建自己的时间服务器

上面我们是利用别人的时间服务器来同步时间,这些时间服务器都是比较权威的。当我们自己搭建时间服务器就不用crontab来定时去跑。

1,安装时间服务器ntp

yum install ntp

2,配置ntp

[root@localhost ~]# cat /etc/ntp.conf |awk '{if($0 !~ /^$/ && $0 !~ /^#/) {print $0}}'
restrict default ignore   //默认不允许修改或者查询ntp,并且不接收特殊封包
restrict 127.0.0.1        //给于本机所有权限
restrict 192.168.1.0 mask 255.255.255.0 notrap nomodify  //给于局域网机的机器有同步时间的权限
server time.nist.gov prefer      //设置时间服务器,加prefer表示优先
server 0.asia.pool.ntp.org
server 1.asia.pool.ntp.org
server 2.asia.pool.ntp.org
server  127.127.1.0     # local clock
fudge   127.127.1.0 stratum 10
driftfile /var/lib/ntp/drift
keys /etc/ntp/keys

3,启动 ntp

[root@localhost ~]# /etc/init.d/ntpd start

4,查看并测试

[root@localhost ~]# netstat -upnl |grep ntpd   //查看时程

[root@localhost ~]# ntpq -pn    //查看同步的服务器IP
 remote           refid      st t when poll reach   delay   offset  jitter
==============================================================================
 50.77.217.185   .INIT.          16 u    -   64    0    0.000    0.000   0.000
 202.90.158.4    .INIT.          16 u    -   64    0    0.000    0.000   0.000
 202.71.100.89   .INIT.          16 u    -   64    0    0.000    0.000   0.000
 202.134.1.10    .INIT.          16 u    -   64    0    0.000    0.000   0.000
*127.127.1.0     .LOCL.          10 l   18   64  377    0.000    0.000   0.001

[root@localhost ~]# ntpstat   //同步的结果
synchronised to local net at stratum 11
 time correct to within 12 ms
 polling server every 512 s

remote:即NTP主机的IP或主机名称。注意最左边的符号,如果由“+”则代表目前正在作用钟的上层NTP,如果是“*”则表示也有连上线,不过是作为次要联机的NTP主机。
refid:参考的上一层NTP主机的地址
st:即stratum阶层
when:几秒前曾做过时间同步更新的操作
poll:下次更新在几秒之后
reach:已经向上层NTP服务器要求更新的次数
delay:网络传输过程钟延迟的时间
offset:时间补偿的结果
jitter:Linux系统时间与BIOS硬件时间的差异时间

推荐第一种方法,虽然搭建个时间服务器,还是比较简单的,但是我觉得没有这个必要。如果用别人的时间服务器,每隔10分钟同步一次,可以精确到毫秒。



转载请注明
作者:海底苍鹰
地址:http://blog.51yip.com/server/1474.html/comment-page-1

3 条评论

  1. andijo 留言

    如果是服务器的话应该推荐第二种,这样能保证时间不是跳跃的。

  2. 风轻云淡 留言

    谢谢,很有用。

  3. jack 留言

    crontab是什么文件,在哪。如果系统有ntpdate,又该怎么设置。
    [root@42 tmp]# ntpdate time.nist.gov
    22 Apr 17:33:26 ntpdate[46485]: no server suitable for synchronization found
    怎么设置呢?谢谢